 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
How often should I clean the grids on my D.E. (Diatomaceous Earth filter)?
Most manufacturers recommend that the following procedure be done on an annual basis. Disassemble the filter, clean with garden hose, inspect the grids for tear and holes.
This type of filter utilizes D.E. powder to pull debris from the water. D.E. is fossilized plankton (diatoms) that have been ground into a fine powder. The grids within the filter must be always be coated with D.E. powder for proper filter operation.
Adding D.E. Mix a combination of D.E. and water in a bucket. Slurry the solution so it looks like a milk shake. Slowly pour this slurry into the skimmer while the pump is running. Once the grids are coated, the pool debris, waste, and algae will be removed from the pool water. The water flows through the grids and flows out the end opening and then the filtered water is returned to the pool.
©2007 Poolmart & Spas
5738 South Main Street
Clarkston, Michigan 48346
phone: (248) 625.0729 fax: (248) 625-7079
e-mail: poolmartinfo@poolmartspas.com